Gitails logoGitails
How it works

From shop drawings to a parametric IFC model and Revit family

A short manual on what to upload, what Gitails can build and what you get.

01The big picture

Five steps, one product

  1. upload_file1

    Upload

    Vector PDF or DXF of one product

  2. fact_check2

    Free drawing check

    Runs before you pay

  3. toll3

    5 credits

    Spent when you send the drawings

  4. auto_awesome4

    AI reads your drawings

    Takes a few minutes

  5. view_in_ar5

    Edit in 3D & download

    IFC and Revit (.rfa) included

You upload a manufacturer's shop drawings of one product. Gitails checks them for free, the AI reads them, and you get a parametric 3D model to adjust and download as an IFC file and a Revit family (.rfa).

02Good drawing sets

What makes a good drawing set

  • Side by side at 800% zoom: in a vector PDF the number 2400 stays sharp and you can select it; in a scanned PDF the same number is blurry and you can't.

    2.1 Use a vector PDF

    A vector PDF has real lines and text you can select. A scan holds only pixels, so the AI can't trust the sizes it reads.

  • Animation: three sheets of one balustrade shop drawing form a good upload, while a catalogue page showing six different products is a bad one.

    2.2 One product per upload

    Upload one product with all its sheets. If one page shows several products, the AI can't tell which one you mean.

  • Animation: a desk drawn with plan, front and side views becomes a 3D shape with all sizes known, while a front view alone leaves the depth as a question mark.

    2.3 Enough views for the 3D shape

    Front, side and top views give the width, height and depth. From a front view alone, the AI has to assume the depth.

  • Animation: a balustrade drawing with dimensions and a units note in millimetres, next to the same drawing with no dimensions and a not-to-scale stamp.

    2.4 Dimensions on the drawing

    The AI reads written sizes straight off the sheet. Without them it has to guess. Millimetres work best.

  • Animation: a pendant light shop drawing is suitable, while a house floor plan, a brochure page and a product photo are not.

    2.5 Shop drawings of a product

    Gitails models one manufactured product from its shop drawings. It can't model a building, a brochure page or a photo.

  • Animation: the AI reads a PDF and a DXF file, a DWG file uploads but stays unread, and the upload refuses a scanned PDF, a JPG photo and an OBJ model.

    2.6 File types at a glance

    The AI reads vector PDF and DXF files. You can upload a DWG, but the AI can't read it yet. The upload refuses images and 3D models.

03Before you pay

The free drawing check

Pick a level to see a sample result.

Sample result: level 3

warning

Drawing check: Level 3 — Incomplete geometry

Free

The drawings don't fully define the 3D shape. It can be built, but some sizes will be assumed.

Recognised: A stainless steel balustrade with vertical round balusters and a top rail

  • warning3No side view or plan

    With no side view, plan or section, the AI can't see the product's depth and will assume it.

    buildFix: Upload the side elevation or plan sheet.

  • info2The fixings have no sizes

    The drawing shows the screws and brackets that hold the rail without sizes, so the AI will simplify them or leave them out.

    buildFix: If the fixings matter to you, add their sizes to the drawing.

This check is a prediction by a smaller AI model, not a guarantee. The paid read looks at your drawings again from scratch.

Level 3: tick the box to accept before you can send.

Example only. This page sends nothing.

The check costs nothing and runs before you spend a credit. It predicts the result, and the final model can still differ. Each finding says how to fix it, for example “Upload the side elevation”.

04Shapes

What Gitails can build

  • Boxes and bars

    Panels, plates, rails, legs.

  • Round tubes and rods

    Posts, handrails, suspension rods.

  • Custom profiles

    C-channels, angles, rounded or arched outlines, with holes.

  • Bends

    Quarter-circle elbows on round tubes.

  • Curved or folded sheets

    Fins, reflectors, bent plates.

  • Turned shapes

    Domes, cones, round caps and fittings.

  • Repeats

    Balusters, slats, louvres. The count can follow the length.

  • Tilts and rotations

    Sloped or angled members, like louvre blades.

  • Tapers and twists

    Legs that narrow toward the floor, twisted bars and columns.

  • Rounded edges

    Cushions, upholstered bases and table tops with soft edges and corners.

  • Two views, one body

    Shapes drawn in two views, like a sofa arm that slopes in front and is rounded in plan. Parts of one piece join with no seams.

  • Switchable parts

    Turn parts on and off, such as the start or end post.

    toggle_onStart post: ontoggle_offEnd post: off

do_not_disturb_onNot supported yet

Revit and IFC can model these, but Gitails can't yet. It builds them as the nearest simple shape, and the drawing check warns you.

  • arrow_forward

    Organic / free-form shapes

    Gitails builds it as a simple turned or extruded shape.

  • arrow_forward

    Fabrics and cushions

    Gitails builds it as a box with rounded edges.

  • arrow_forward

    Moving mechanisms

    Gitails builds it as one fixed position.

Gitails builds any other shape as the nearest simple shape, and the drawing check warns you about it.

05Parameters

Parameters explained

Gitails builds the model from named sizes such as Length, Height and Post size. Change one and the parts that depend on it follow. Try the Length slider.

Length 2400 mm · 2 sections · 18 balusters

2400
End posts follow the lengthExtra posts keep posts at most 1800 mm apartBalusters at most 120 mm apart
tuneParameter Controls

Range 1200 – 3600 mm

Height (mm)1000
Post size (mm)measured50
Max post spacing (mm)1800
Max baluster spacing (mm)assumed120

Example values. Only Length moves here.

stated

Written on the drawing

The AI read the size from your sheets. The workbench shows no badge for these.

measured

Measured from the drawing

No size is written, so the AI measured the drawn lines.

assumed

Assumed: check it

The drawing doesn't show this size. Check it against your product.

tuneYou can give each number a min and max (the tune button next to it), so nobody can set a size your product doesn't come in.

06Chat

Refine it by chatting

You can chat as much as you like on a paid drawing set. Gitails checks each change before applying it.

auto_awesomeAI Design Assistant

Make the rail 50 mm deeper

Done. The top rail is now 75 mm deep (it was 25 mm). I checked that it still sits within the posts.

Add a switch for the start and end post

I added two on/off switches, Start post and End post. In this view the end post is off.

Why is the depth 75 mm?

Sheet 2, the side elevation, shows the posts 75 mm deep. No part sticks out further, so the product is 75 mm deep.

75 mmtoggle_onStart post: ontoggle_offEnd post: offdescriptionDepth 75 mm · from sheet 2
07Output

What you get

08Cost

Cost in one line

toll5 credits
=
1 new model
drawings read by the AI
  • checkFree drawing check
  • check10 chat edits included
  • checkIFC exports included
  • checkUp to 3 Revit families included
  • check1 credit = 5 more edits

See plans and prices

09Privacy

Your drawings stay private

  • personPrivate to your accountWe keep your drawings in private storage that only your account can reach. We save your latest result and workbench edits for 3 days so you can reopen them, and we don't store the IFC files you export. Autodesk's cloud builds your Revit families, and we keep them in private storage for 30 days so you can download them.
  • public_offShown only with your permissionWe don't show your drawings or models as examples, on our website or anywhere else, without your written permission. The models are yours.
  • auto_deleteDeleted after 30 daysOur system deletes uploaded drawings and their job records after 30 days.
  • blockNot used for AI trainingWe send your drawings only to AI providers whose terms say they don't train on them, and we don't train AI on them ourselves.

Details: Privacy Policy · Terms

10Checklist

Checklist before you upload

Gitails · before you upload

Drawing set checklist

0/6 ticked